Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery     
 
 

Machining (when needed) is a process step in Ceramic’s manufacturing, reducing the complex ceramic part from the to its final tolerances. When machining is required, it can occur at two points during the production process. The point at which machining occurs determines the specific process used.

Machining Green Bodies Certain features can be machined into a green-body, or a bisque-fired ceramic part before firing it to its full density. Green body machining is done using tool steel cutters and conventional methods. Features Ceramic commonly machines into green-bodies include:

§ Holes

§ Undercuts

§ Other special configurations

Fine Diamond Machining Full Density Parts Ceramic parts fired to their full density are too hard for machining with tool steel cutters or even conventional methods. Following a final firing, when as-fired tolerances are not sufficient, fine diamond machining (grinding) using diamond impregnated cutters is often required. Features Ceramic commonly fine diamond machines into fully fired ceramic parts include:

§ Diameters and surfaces that have tighter tolerance requirements than can be achieved in the as-fired condition

§ Ceramic tubes and special extruded rods requiring fine features or tolerances

Also, fine diamond machining is used at Ceramic to machine non ceramics, including .

No Machining All – Depending upon the requirements of the custom ceramic part, the geometry and final tolerances can often times be achieved during the . This is the most cost effective solution. Features Ceramic commonly achieves with no machining whatsoever include:

§ Fully functional ceramic screw threads

§ Square holes that cannot be machined

§ Specific radii and fillets

§ Other complex geometries that cannot be machined

Ceramic Grind Blanks and Ceramic Parts Prototypes

Ceramic manufactures its own grind blanks, insuring an uninterrupted supply and the versatility to produce virtually any type or formulation of ceramic blank required. When delivery time is tight, having our on blanks always available, Ceramic may be able to grind a ceramic part complete instead of making a molding tool.

Industrial Ceramic Intriduction
 
Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.
 
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.

Precision Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries.Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs.Refractory Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery,Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:

Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery
High temperature ceramics – crucibles, nozzles, lasers, furnace/kiln fixtures
Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery
Wear and corrosion resistant ceramics – plates, housings, gages, caps/lids
Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery
Electrical insulation ceramics – contact blocks, standoffs, fasteners, spacers

Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery

Precision Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.

 Wear and Corrosion Resistant Electrical Insulation And Refractory Machining Ceramic Parts On Petroleum Machinery